Translate Page



Bookmark and Share




Wheelchair Threshold Ramps

Wheelchair Threshold Ramp

Threshold ramps are designed to allow wheelchair users to more easily pass over the raised threshold of a doorway. Most doorways have some sort of raised threshold that can be as low as ½ or as high as 4" or more in the cases of some sliding glass doors and can cause a serious impediment to passing through using a wheelchair.

Threshold ramps are approximately the same width as an average doorway and come in lengths from 6" to about 30". They can be used as a portable ramps that can be moved from place to place or secured in place for permanent use. When secured to a doorway local building codes may apply and the local building department should be consulted.

Most threshold ramps are made of aluminum but there are a few made from recycled vehicle tires on the market as well as some fibre-glass models.

Depending on the manufacturer, the doorway threshold style ramps will have weight capacities of 600 lbs. to 850 lbs.

People requiring a threshold ramp will often need two of them because if there is a threshold on the outside of the door it is likely there will also be one on the inside. The two thresholds may also be different heights so it may be necessary to buy two different lengths of threshold ramps.

For information about choosing the right wheelchair ramp visit our web page on choosing a wheelchair ramp.


Popular Threshold Wheelchair Ramps Available from Wheelchair Vendors


EZ-Access Threshold Wheelchair Ramp
Material: Aluminum
Surface: Non-Skid
Width: 34"
Lengths Available: 6, 9, 12, 17, 22, 27 or 32"
Weights; 3, 5, 6, 8, 10, 15 or 20 lbs.
Weight Capacity: 600 Pounds (272 kgs.)
Limits of Use: 1/4" to 6 1/4" of Rise
Compatible Equipment: Power & Manual Wheelchairs, Scooters etc.
Usage Guideline: Doorways, Curbs, Landings, Thresholds etc.
EZ Access Threshold Wheelchair Ramp
EZ-Access Rubber Threshold Ramp
Material: Recycled Rubber
Surface: Non-Slip
Sizes: 1 1/2" x 14 1/2" x 36" or
2 1/2" x 24" x 48"
Weight: 18 or 40 lbs.
Weight Capacity: 850 Pounds (386 kgs.)
Compatible Equipment: Power & Manual Wheelchairs and Scooters
Usage Guidelines: Standard Doorways, Sliding Doors etc.
Wheelchair Rubber Threshold Ramp
PVI Wheelchair Threshold Ramp
Material: Aluminum
Surface: Non-Slip
Sizes: 8", 10", 12", 16" or 24" x 32" wide
16" or 24" x 36" wide
Weight: 3 to 15 lbs.
Weight Capacity: 600 Pounds (272 kgs.)
Compatible Equipment: Power & Manual Wheelchairs, Walkers and Scooters
Usage Guidelines: Standard Doorways, Sliding Doors etc.
PVI Wheelchair Threshold Ramp
PVI Bariatric Threshold Ramps
Material: Aluminum
Surface: Non-Skid
Width: 36"
Lengths Available: 16" or 24"
Weights; 12 or 21 lbs.
Weight Capacity: 800 Pounds (363 kgs.)
Limits of Use: 2" or 4" of Rise
Compatible Equipment: Power & Manual Wheelchairs, Walkers, Scooters etc.
Usage Guideline: Doorways, Low Curbs, Thresholds etc.
PVI Bariatric Multi-fold Wheelchair Ramp
Decpac Threshold Ramp
Material: Fiberglass Laminate
Usable Width: 33"
Length: 2' 10" ft.
Weight; 13 ¼ lbs.
Weight Capacity: 660 Pounds (260 kgs.)
Compatible Equipment: Power & Manual Wheelchairs and Scooters
Usage Guideline: Curbs, Steps, Low Porches & Decks
Decpac Threshold Ramp
 

Motion Specialties Lower Banner Advertisement

Notice: Information on the wheelchair.ca web site is for informational purposes only and not meant to be a substitute for the advice provided by physicians, therapists or other medical professionals. All information is general in nature and may not necessarily apply to everyone as individual needs may vary.


chme member

Home - Dealers - Links - Terms of Use - Privacy - Advertise - Contact

Copyright 2003-2012 © Wheelchair.ca --- All Rights Reserved

Site designed and hosted by Basic Website Design

website security
CSSD Logo IBDE Logo Monitor.us Logo
View Our Stats
Web Analytics